3Edit Web Builder iconOptional guide

Add a custom domain to your 3Edit site.

Put your site on your own address, such as www.yourshop.com. 3Edit shows you the exact DNS records to add, on 3Edit Cloud or your own Vercel.

About 10 minutes, plus time for DNSLast updated

Before you start

Follow only the part for where your site is published. Both work the same way: publish, open Domains and hosting, connect your domain, add the records at your domain provider, then press Refresh.

You need:

  • A domain you own, and access to its DNS settings at your domain provider, where you bought it.
  • Your site already published: on 3Edit Cloud, or on your own Vercel.

What are DNS records?

DNS records are small lines of settings at the company where you bought your domain. They tell the internet where your site lives.

3Edit shows each record with three things to copy: Type, Name / Host and Value / Points to.

The types you’ll see are A (for your main domain, like example.com), CNAME (for www or another subdomain, like www.example.com) and sometimes TXT (only to prove you own the domain).

  • At your domain provider, choose to add a new record, pick the same Type, then paste the Name and the Value 3Edit shows.
  • Some providers show your main domain as @, and some leave the Name box empty for it.
  • You don’t change your nameservers (NS records). Leave them as they are; you only add these records.

If your site is on 3Edit Cloud

Step 1 of 6

Open Domains and hosting

In the editor, press the globe in the top bar, Domains and hosting, to open Hosting Settings.

Just published? The Custom Domain card, Connect your own website address, opens it too: press Connect →.

Step 2 of 6

Enter your domain

Under Custom Domains, type your domain in the yourdomain.com box: the domain only, without https:// or anything after it.

For a domain like example.com, Also connect www.example.com is ticked for you. Then choose Which address should visitors use?: www.example.com is marked (recommended).

Step 3 of 6

Press Connect

Press Connect. 3Edit adds your domain and shows DNS Pending and DNS setup required, with the records to add underneath.

Step 4 of 6

Add the records at your domain provider

Sign in where you bought your domain and open its DNS settings. Add each record 3Edit shows under Point your domain to 3Edit: its Type, Name / Host and Value / Points to. Press the copy icon beside each value and paste it exactly.

Add an A record for your main domain, a CNAME record for www or another subdomain, and a TXT record only if 3Edit shows Confirm domain ownership.

If 3Edit shows Confirm domain ownership, add that TXT record too, with its full value: Show full value shows all of it. Connecting example.com and www.example.com together? Add the records for both.

Here is what the records look like. Always copy the exact values 3Edit shows you:

Address you connectTypeName / HostValue / Points to
example.com (your root domain)A@ (root)76.76.21.21
www.example.comCNAMEwwwThe value 3Edit shows, such as cname.vercel-dns.com
shop.example.com (a subdomain)CNAMEshopThe value 3Edit shows, such as cname.vercel-dns.com
Step 5 of 6

Press Refresh

Back in 3Edit, press Refresh beside each domain. DNS changes can take a few minutes, but sometimes up to 24 hours.

Not active yet? Give it a little longer, then press Refresh again.

Step 6 of 6

Your domain is live

Your domain shows a green Connected badge, with “example.com is connected. Your domain is live.” Under Live URL, press Visit to open your site at its new address.

If your site is on your own Vercel

Step 1 of 5

Publish to your own Vercel first

Your site needs to be live on your own Vercel before you add a domain, with your Vercel account still connected. See Connect your own Vercel to 3Edit.

Step 2 of 5

Open the Your own Vercel section

Press the globe in the top bar, Domains and hosting. In Hosting Settings, the domain section is called Your own Vercel: “Connect your own domain to this site on your Vercel account.”

Step 3 of 5

Enter your domain and press Connect

Type your domain in the yourdomain.com box, choose which address visitors use, as under “If your site is on 3Edit Cloud”, then press Connect.

Step 4 of 5

Add the records at your domain provider

At your domain provider, add each record 3Edit shows under Point your domain to your site, copying the exact values: an A record for your main domain, a CNAME record for www or another subdomain, and a TXT record only if 3Edit shows Confirm domain ownership.

Here is what the records look like. Always copy the exact values 3Edit shows you:

Address you connectTypeName / HostValue / Points to
example.com (your root domain)A@ (root)76.76.21.21
www.example.comCNAMEwwwThe value 3Edit shows, such as cname.vercel-dns.com
shop.example.com (a subdomain)CNAMEshopThe value 3Edit shows, such as cname.vercel-dns.com
Step 5 of 5

Press Refresh until it’s Connected

Press Refresh beside each domain. When DNS is ready, your domain shows the green Connected badge and is live on your Vercel site. Press Visit under Live URL to open it.

Good to know

  • 3Edit shows the records for the host your site is on now, so follow the records on your screen.
  • Connected more than one domain? Set as primary chooses the address 3Edit shows as your site’s main one, marked ★ Primary.
  • If 3Edit says DNS records could not be loaded, press Refresh, or remove the domain and add it again.
  • It works the same way on Mac and Windows.

Questions people ask.

Yes. 3Edit hosting (3Edit Cloud) and custom domains are included in plans.

No. Keep your nameservers as they are, and just add the records 3Edit shows you.

No. Your domain stays where you bought it: you only add the records 3Edit shows you in its DNS settings.

Yes. Vercel’s Hobby plan includes up to 50 domains per project. It is for personal, non-commercial projects, so a store that sells fits Vercel’s Pro plan, which has unlimited domains.

Start vibe coding today.

Download 3Edit for Mac or Windows and build your first professional website in minutes.

Download now
macOSWindows